1 (800) 486-4328 // 1 (204) 633-1999
Aerotech Herman Nelson Heaters Intl. Inc.

Featured Heater

3-in-1 Herman Nelson Recirculating Heater

588,000 BTU/h

RUN TIME: 19 Hours at 100% Load

Tips to Help Improve Efficiency – Construction Heaters

Boost construction heater efficiency with strategic choices. Select heaters that match your tasks, optimize placement for rapid heating, use fans for even heat distribution, insulate to prevent heat loss, and position thermostats accurately. Dive into our article for expert insights on cost-effective construction heating.

Share this post

Keeping your construction heaters running at maximum efficiency is crucial to keeping your operation cost down while keeping the area heated adequately. So, what can you do to achieve that? Well, that’s what this article is all about.

Utilize the Most Appropriate Heater for Your Construction Site

Choosing construction heaters that are well-suited to the tasks at hand is the most straightforward step to improving the overall efficiency of your heating systems. The first step in determining which heater is ideal for your work site is to consider the purpose of adding heat in the first place.

Are you attempting to keep the work and the resources from becoming frozen? Do you want to use it to help with curing the concrete? Are you only aiming to satisfy the comfort needs of your workforce?

If you have a good idea of the kind of heater you need, you may explore your options by consulting with a professional who specializes in heating.

Take Into Account The Construction Site’s Layout

To get the most out of the heaters you rent, it is also a good idea to carefully consider the design of your structure and the locations of the various heating units. When determining where to put your heaters, look for areas close to the foundation of the structure wherever possible.

It is crucial to keep in mind that heat travels up, so positioning heaters at the lower levels of the structure, away from stairwells and elevator shafts, can help heat the whole area more rapidly.

Making Use of Fans to Promote Air Circulation Around The Worksite

Utilizing fans and other types of air movers to disperse the warm air around the building site is one of the simplest methods for improving the effectiveness of the heaters.

Make sure that you also utilize the “tumbled” effect. This technique uses fans and air movers that are pointed downwards. The warm air is forced to go down and eventually finds a way to go up again. Then, the process repeats itself. As a result, better heat distribution is achieved, and cold spots are minimized.

Add Insulation To The Work Space Area

If a space is not adequately insulated, a significant amount of heat may be lost. It might be challenging to insulate a construction site effectively. On the other hand, it’s crucial to get the most out of your portable heaters by minimizing fuel waste.

You can try using polyiso insulation or plywood to cover windows and doors. You can erect polyethylene tents over their whole open workspaces to help retain the heat.

Optimize The Thermostat Position

The majority of portable heaters for construction come with an integrated thermostat. It is important to avoid positioning the thermostat so that the heater will directly hit it. If you want to get a more accurate reading of the temperature in your workstation, try moving the thermostat near the edge of one of the walls.

Wrapping it All Up

So that’s it for now. Of course, there are other techniques you can employ to ensure that your heater is running at maximum efficiency. For now, this article should help you get started and help point you in the right direction

Did You Find This Article Helpful?

YES
NO

Please consider Sharing this post

Connect On Online

Featured Heater

Herman Nelson 3-in-1 Indirect Fired Heater

2024 - 2025 Holiday Business Hours

Happy holidays

DECEMBER 24
[Open 8:00am – 12:00pm CDT]
DECEMBER 25
[CLOSED]
DECEMBER 26
[CLOSED]
DECEMBER 27
[OPEN 8:00AM – 4:30PM CDT]
DECEMBER 31
[OPEN 8:00AM – 4:30PM CDT]
JANUARY 1
[CLOSED]
JANUARY 2
[Back To Regular Hours]

Regular Business Hours
MONDAY – FRIDAY 8:00AM – 4:30PM CDT

DECEMBER 24 [Open 8:00am – 12:00pm CDT]
DECEMBER 25 [CLOSED]
DECEMBER 26 [CLOSED]
DECEMBER 27 [OPEN 8:00AM – 4:30PM CDT]
DECEMBER 31 [OPEN 8:00AM – 4:30PM CDT]
JANUARY 1 [CLOSED]
JANUARY 2 [Back To Regular Hours]

Regular Business Hours
MONDAY – FRIDAY 8:00AM – 4:30PM CDT

we look forward to seeing you in the new year!

Indirect Fired Heater Manufacturer

Thanks for Visiting Aerotech Herman Nelson!

Would you help us improve our website by filling out a quick survey?