1 (800) 486-4328 // 1 (204) 633-1999
Aerotech Herman Nelson Heaters Intl. Inc.

Featured Heater

3-in-1 Herman Nelson Recirculating Heater

588,000 BTU/h

RUN TIME: 19 Hours at 100% Load

Portable heating solutions for industrial use during winter conditions.

Winter Weather Is Coming: Are You Ready? A Guide to Choosing the Right Industrial Heater

As winter approaches, ensure your business stays warm. Learn how to choose the best portable heating solution for your needs.

Share this post

As winter sets in, freezing temperatures can disrupt operations, delay business, and jack up energy costs. An appropriate portable heating solution installed at your location ensures seamless operations and reinforces confidence in your industry. Be it aviation, construction, or any field that involves working outdoors or in semi-outdoor locations, portable heaters can make all the difference in terms of efficiency and safety.

Therefore, selection of the right portable heating system is critical for a business owner or facility manager. Let’s break it down: key factors to take into account in choosing portable or industrial heating solution so you would prepare your site for whatever winter brings.

Assess Your Portable Heating Needs

Understand Your Site’s Size and Layout

Before choosing a heater, evaluate the size and layout of the space that needs heating. Large open areas need more powerful heaters, while more minor, confined spaces can get by with a more portable heat option. Consider whether your heater will remain in one location or if you need a portable heating solution that can quickly move from one area to another.

Identify Your Temperature Requirements

Not all industrial locations have the exact heating needs. Are you trying to maintain a specific temperature, or do you need to prevent freezing? Consider your location’s temperature needs and how much portable heat you will need to meet those needs. Heaters with adjustable BTU output will allow for better temperature control and energy costs.

View our BTU Calculator here

Evaluate Fuel and Power Availability

Next, look at what power sources are available at your site. If electricity is limited, you may opt for fuel-powered heaters. But if your location allows it, an electrical heater can be a cleaner and more efficient option. The right fuel choice depends on site accessibility and how frequently you must move or refill the heater.

Heater Types and Their Best Use Cases

Portable heating vs. Permanent Heaters: Which Is Right for You?

Use portable heaters for far more than temporary setups or building sites. They provide flexible solutions to adapt to your changing needs, letting the heating equipment move with your project as it progresses. Such portable heating solutions will be ideal for places that require flexibility, allowing you to adapt and keep moving forward in the right direction.

Portable heaters keep ground operations running smoothly in industries like aviation. In contrast, electrical heaters work well for indoor spaces with controlled temperatures.

Fuel-Powered Heaters vs. Electrical Heaters

Suppose you happen to have an operation on a site with no easy access to electricity; then, fuel-powered heaters offer much higher BTU output and even greater portability. Most of these kinds of heaters are ducted and thereby allow heat dissemination on a larger scale. Electrical heaters are cleaner, quieter, and easier to maintain, hence ideal for operations that are smaller in scale and indoor or when enclosure sites have ventilation problems.

Maximize Fuel Efficiency and Reduce Costs

Choosing the Right Heater Size

Selecting the right heater for your space isn’t just about power—it’s about efficiency. Too large heaters waste unneeded energy, and too small of a heater won’t satisfy your heating needs. Calculate the BTU requirements for the size of your site to conserve fuel consumption. A properly sized heater will provide portable heat with no unnecessary waste.

Fuel Consumption and Cost Consideration The fuel heaters will have several efficiency ratings; a few models will be compared by comparing fuel consumption to output. Some heaters can allow you to recirculate air to minimize the amount of fuel used. Sometimes, electrical heaters are more expensive to operate at the front end and may be more efficient over time because of the relatively small closed-off areas.

Top Portable Heating Recommendations for Winter Conditions

Herman Nelson BT 400NEX Series – Portable Heating Solution

The Herman Nelson BT 400NEX Series is a compelling industrial heating device that will serve well in large areas, such as building sites and airport tarmacs. They have a very high BTU output that enables the warming up of significant regions, even during the most extreme winter periods. These heaters can quickly be mobilized on-site to several locations. They should provide warmth reliably into each corner of your space. This would go a long way in easing comfort and safety in the entire operation – from freezing temperatures to strong winds-by delivering the needed performance and flexibility.

See our Herman Nelson BT 400NEX-SERIES of indirect fired portable heating solutions

HPL 600D7 – All-in-One Portable Heating Solution

The HPL 600D7 performs well in severe weather conditions, promising heat availability even during the most extreme winter periods. The system includes a powerful recirculating indirect heater, high-performance LED lights mounted on a 23-foot light tower, and a versatile power generator.

The generator can power tools and even charge a cell phone. The HPL 600D7 will fit right in for industries requiring portable, multi-functional solutions. Whether you’re working on a remote site or managing emergency operations, this unit provides consistent warmth, bright illumination, and essential power to keep your project on track. Its high output and portability allow it to go wherever and whenever it’s needed.

Get the full details of the Herman Nelson All-In-One indirect fired, recirculating portable heating solution here

Frost Fighters– – Portable Heating Solution

Frost Fighters are also the choice for all construction and event sites. They provide efficient heating solutions to small sites and temporary setups. Being versatile in electrical sources, they offer reliability in providing warmth where a portable, easy-moving system adapts to the changing demands on the site. Frost Fighters deliver flexibility, quickly providing much-needed heat—from a cold morning startup with the construction crew to keeping your guests warm at an outdoor event. Compact yet powerful, Frost Fighters keep you productive and comfortable even on the coldest days.

See the Frost Fighter portable heating catalogue here

Winter Is Coming: Get the Right Heater Today

Winter weather can strike anytime, so businesses must stay prepared. Choosing the proper industrial heater keeps you running smoothly, economizes on cost, and keeps your work environment comfortable and productive. Aerotech Herman Nelson has many heaters designed for different industrial needs.

Visit our product pages to learn more about the heaters mentioned above, or contact us to speak with a heating expert and find the best solution for your site.

Did You Find This Article Helpful?

YES
NO

Please consider Sharing this post

Connect On Online

Featured Heater

Herman Nelson 3-in-1 Indirect Fired Heater

Indirect Fired Heater Manufacturer

Thanks for Visiting Aerotech Herman Nelson!

Would you help us improve our website by filling out a quick survey?