FLAGRO HEATER FVO-400
Flagro Heater Portable Indirect Oil Fired – Electric Motor Driven
The Flagro Heater FVO-400 provides 390,000 BTUs of clean air, free from moisture and contaminated fumes. Quick connect ducts attach to the front cap outlets and enable the user to disburse the heated air over a large area. Efficiency and simplicity make Flagro indirect heaters an ease to operate.
The heater is ETL approved. Fully welded heat exchanger and clear fuel lines with fuel gauge. Includes ‘smart indicator’ which shows possible job site power loss issues and helps with service and trouble shooting in the field.
OPTIONS
- Flexible Duct sections 12” dia. X 12 ft or 12” dia. X 25 ft
- Remote thermostat maintains precise space temperature
Features & Benefits
POWERFUL
- Fan Motor: 1 HP @ 1,725 RPM 2,500 CFM
- 390,000 BTU/h
- 2,500 CFM
SAFETY
- C ETL U.S.
- ETL certified
EASY TO USE
- Easy panel access simplifies routine maintenance
- Stand-Alone
- Single Person can Move This Heater
APPLICATIONS
- TEMPORARY HEATING OF BUILDINGS UNDER CONSTRUCTION
- ALTERATION
- REPAIR
- EMERGENCIES
Heating Capacity | 390,000 BTU/h |
Maximum Air Delivery Rate | 2,500 CFM |
Fuel Capacity | 42 U.S. Gallons |
Fuel Type | Diesel, Kerosene, JetA |
Maximum Fuel Consumption | 2.75 U.S. GPH |
Nozzle | 2.00 X 60B @ 170 PSI |
Fan Motor | 1 HP @ 1,725 RPM 2,500 CFM |
Ignition | Electronic Spark Ignition |
Ductability | 30 ft Discharge |
Burner | Riello |
Outlet Duct | 1 x 12" or 1 x 16" Diameter Outlet |
Run Time | 16 hours |
Electrical | 115V/60Hz/1Ph/15Amp |
Air Flow | 2,500 CFM |
Approval | C ETL U.S. |
Certification | ETL certified |
Weight | 365 lb |
TESTIMONIAL
“Our customers’ expectation of zero defects demands laser focus from our suppliers. Aerotech Herman Nelson is one of those companies we depend on for products and services that meet our commitment to excellence. In 2014, Aerotech Herman Nelson has successfully demonstrated its commitment to excellence with “100% quality and on-time delivery” to Lockheed Martin Aeronautics. Your superior performance and commitment to meet customer expectations is only made possible when all of us perform with excellence.”