In order to properly create a quote, it is necessary for you fill in the (*Required fields) found in the form below. This information helps us to organize and communicate with you effectively.
We respect your privacy and therefore will never use, sell, share or distribute the collected information you provide us here with a third-party. This information is solely for our usage to create your quote within our systems
We will respond to you within 24 hours or the next business day.
If you require immediate assistance, please call 1 (800) 486-4328.
(* Required fields)
THE BT400-NEX-G
INDIRECT FIRED HEATER - 400K BTU's
Portable Indirect Diesel Fired - Diesel Engine Driven
(Temperature range 150 °F – 250 °F)
This Indirect Fired Heater is designed to operate in freezing weather down to -40 °F/°C and below. This indirect fired heater has a heat rise of 350 °F (177 °C) which means that if the ambient temperature is at -40 °F, the heat outlet will still be 250°F. Powered by a Honda 5.5 HP Gasoline driven engine, this Herman Nelson indirect heater is the best in the industry and used by both the US and Canadian military and most major airlines worldwide. The BT400NEX-G indirect fired heater is manufactured in Canada and built to withstands the brutal Canadian winters. This heater has been in continuous production with ongoing technological improvements since 1973. In 2010 the original Herman Nelson was upgraded to full electronic temperature control and valves. Easier to operate, more reliable and economical to maintain. Certified by O-TL to UL 733-1993 (TO CSA STANDARDS)
HEATER SPECIFICATIONS
| Heating Capacity | 400,000 BTU/h |
| Maximum Air Delivery Rate | 1,500 CFM |
| Max Output Temp | 250 °F (121.1 °C) |
| Fuel Capacity | 16 U.S. Gallons (60.56 L) (132.49 L) |
| Fuel Type | Gasoline |
| Maximum Fuel Consumption | 3.0 GPH @ Full Output |
| Nozzle | 2.5 GPH 45° |
| Static Pressure | 0.65" w.c. |
| Ignition | Electric |
| Ductability | 30 ft Discharge |
| Engine | Honda GX160 Gasoline - Electric Start |
| Outlet Duct | 1 x 12" Diameter Outlet |
| Run Time | 8 Hours |
| Electrical | 12 VDC 20A |
| Air Flow | 1,500 CFM |
| Approval | O-TL |
| Temp Rise | 250 °F |
| Efficiency | 83% |
| Hitch Setup | Pintle |
| Certification | O-TL |
| Weight (dry without trailer) | 355 lb (161 kg) |
| Weight (dry with trailer) | 526 lb (238 kg) |
| Dimensions | 51” L x 20” W x 27”H |
Accessories for this heater
FREQUENTLY ASKED QUESTIONS
The BT400 NEX-G is best suited for applications requiring a indirect fired heater that can operate in the most severe conditions in remote locations that do not have any power available or it is difficult to obtain. Best suited to applications requiring thermostatically controlled quick clean air heat such as aircraft engine & cabin pre-heating, remote industrial sites, oil & gas sites and military requirements.
DOWNLOADABLE DOCUMENTS
EXECUTIVE SUMMARY
BT400-NEX SERIES EXECUTIVE SUMMARY
Purveyors of the Finest Heaters Since 1973
The BT400-NEX Series are used in commercial aviation, construction and exploration. In these industries safety is not just a concern but is a requirement for any manufacturer producing a modern heater.
Click below and download our Executive Summary and learn why the BT400-NEX Series of heaters are the number 1 choice of so many industries.